Sold Out $ 6.09
A carboy brush is the best way to clean those hard to reach places in glass jugs, carboys and demijohns. This long nylon brush is tough enough to scrub those stubborn hop resins and fruit pulp yet safe enough for all glass and plastic fermenters.
The angled design allows the carboy brush to completely scrub the bottom of the carboy all the way to the edge. When pulled to the top, the angled head can easily scrub the upper areas where much of the floating debris accumulates. The flexible head can be adjusted for carboys of any shape with a total reach of over 2 1/2 feet!
Handle Length (From end of handle to the bend at the tuft): | 25.5in (64.8cm) |
Tuft Length (From bend to end of tuft): | 7in (17.8cm) |
Tuft Width (average): | 2.25in (57.2mm) |
Handle Material: | Metal |
Brush Material: | Nylon |
$ 3.09
Overall Length: | 16.5in (41.9cm) |
Tuft Length: | 5.5in (14.0cm) |
Tuft Diameter: | 2.5in (6.4cm) |
Bristle Material: | Nylon |
Handle Material: | Metal |
$ 2.99
Overall Length: | 17.5in (44.5cm) |
Tuft Length: | 6.5in (16.5cm) |
Tuft Diameter: | 3.0in (7.6cm) |
Bristle Material: | Nylon |
Handle Material: | Metal |
$ 4.39
Overall Length: | 36in (91cm) |
Finger Loop Diameter: | 1in (2.5cm) |
Brush Head Length: | 3.75in (9.5cm) |
Brush Head Diameter: | 0.25in (.64cm) |
Wire Thickness: | 0.1in (2.4mm) |
Handle Material: | Metal |
Brush Material: | Nylon |
Maximum Reach: | 35in (89cm) |
$ 5.59
Overall Length: | 36in (91cm) |
Finger Loop Diameter: | 1in (2.5cm) |
Brush Head Length: | 3-3/4in (9.5cm) |
Brush Head Diameter: | 3/8in (.95cm) |
Wire Thickness: | 1/16in (2.4mm) |
Handle Material: | Metal |
Brush Material: | Nylon |
Maximum Reach: | 35in (89cm) |
$ 1.99
Overall Length (average): | 7-1/2in |
Tuft Length (average): | 2-1/2in |
Tuft Width: | 5/8in - 3/4in |
Wire Ring Diameter: | 7/8in |
Wire Thickness: | 1/16in |
Tuft Material: | Nylon |
Handle Material: | Metal |
$ 4.99
Overall Length: | 18in (45.7cm) |
Tuft Length: | 3in (7.6cm) |
Tuft Diameter: | 1in (25.4mm) |
Bristle Material: | Nylon |
Handle Material: | Metal |