- Beer Making
- Wine Making
- Cheese Making
- Keg and Draft
- More
- Beer Making +
- Wine Making +
- Cheese Making +
- Keg and Draft +
- More +
- Help
- Sign In
- 1 (585) 749-1882
Sold Out $ 62.99
Brewer's Best primary dual gauge CO2 regulator for draft beer and other draft beverage systems. It features 2 gauges to measure both outgoing pressure and tank pressure and is rated up to 30 PSI. Pressure can be easily adjusted without tools using the large control dial. It has a 5/16in barbed check valve with shutoff and a pressure relief valve. Includes 1 nylon washer.
| Regulator Type: | Primary Beer Regulator - CO2 |
| Output Pressure Gauge: | 0-30 PSI |
| Tank Pressure Gauge: | 0-2000 PSI |
| Barbed Outlet Diameter: | 5/16in OD |
| Integrated Pressure Relief Valve: | Yes |
| Overall Width: | 6-7/8in (17.5cm) |
| Overall Height: | 7-3/8in (18.7cm) |
| Overall Depth: | 3-1/2in (8.9cm) |
| CO2 Valve Stem Coupling Hex Nut: | CGA-320 Thread [0.83in Diameter (21.1mm), 14 Threads Per Inch] |
Fits CGA-320 thread fittings only.
Sold Out $ 61.99
Primary dual gauge CO2 regulator is for all draft beer systems. It features 2 gauges to measure the pressure level in the tank and the outgoing pressure to the keg. The pressure level can easily be adjusted with a screwdriver and it also includes a pressure relief valve for safety. Includes 1 nylon CO2 washer.
| Regulator Type: | Primary Beer Regulator - CO2 |
| Output Pressure Gauge: | 0-60 PSI |
| Tank Pressure Gauge: | 0-2000 PSI |
| Outlet Barb: | 5/16in O.D. (To fit 5/16in or 3/8in I.D. Gas Hose) |
| Integral Pressure Relief Valve: | Pressure relief valve releases at 60 PSI |
| Overall Width: | 6.0in (15.24cm) |
| Overall Height: | 6.5in (16.5cm) |
| Overall Depth: | 3.38in (8.6cm) |
| Shut-Off Valve: | 5/16in or 0.31 (8mm) O.D. Barb |
| CO2 Valve Stem Coupling Hex Nut: | CGA-320 Thread [0.83in Diameter (21.1mm), 14 Threads Per Inch] |
Non-US Customers:
This regulator is intended for use with standard American CO2 tanks with a valve that meets CGA-320 thread specifications (the standard thread for CO2 tanks used in the United States). If you are unsure if this regulator will fit your CO2 tank, please see the dimensions below. An adapter may be required or you may need to replace the coupler of this regulator to fit your CO2 tank.
