Get $10 Off These Eligible Items When You Spend $49 Or More

Firestone Ball-Lock Poppet Valve

Sold Out $ 9.21

• Description
• Details
• Compatibility

• Poppet valve for ball-lock Firestone keg posts including Firestone Challenger V, VI and Super Challenger. Fits gas and liquid keg posts.

• Height:	0.72in (18.3mm)
  Overall Width:	0.44in (11.1mm)
  O-Ring Outside Diameter:	0.28in (7.1mm)
  Material:	Stainless Steel, Rubber

• Fits Firestone Challenger V, VI and Super Challenger ball-lock kegs only (fits gas and liquid keg posts).

View full product details »

Cornelius Ball-Lock Liquid Keg Post

Sold Out $ 12.06

• Description
• Details
• Compatibility

• Liquid keg post for ball-lock Cornelius and AEB kegs. Includes poppet valve and o-ring.

• Height:	1.38in (35mm)
  Post Width:	0.63in (15.9mm)
  Width (max):	0.88in (24.8mm)
  Thread:	19/32 or 0.59in (15.1mm)
  Thread Pitch:	18 Threads per inch
  Material:	Stainless Steel, Rubber

• Fits Cornelius Spartan, Cornelius Super Champion and AEB kegs only.

View full product details »

Cornelius Ball-Lock Gas Keg Post

Sold Out $ 9.49

• Description
• Details
• Compatibility

• Gas keg post for Cornelius and AEB ball-lock kegs. Includes poppet valve and o-ring.

• Height:	1.38in (35mm)
  Post Width:	0.63in (15.9mm)
  Width (max):	0.88in (24.8mm)
  Thread:	19/32 or 0.59in (15.1mm)
  Thread Pitch:	18 Threads per inch
  Material:	Stainless Steel, Rubber

• Fits Cornelius Spartan, Cornelius Super Champion and AEB kegs only.

View full product details »

Citric Acid, 8oz

Sold Out $ 5.22

• Description
• Details
• More Info

• Citric acid is one of the signature ingredients in producing mozzarella & ricotta cheeses. It not only serves as a milk coagulant but it produces the delightfully tangy and bright flavor that these Italian-style cheeses are known for. Citric acid can often be a better choice of acid than lemon juice or other acids because it has a standardized acidity allowing for very consistent results. This citric acid is made in the US from non-GMO and gluten free corn.

• Form:	Granulated
  Contents:	Citric acid (non-GMO corn based)
  Net Weight:	8oz (227g)

• Directions:
  Dissolve required amount (according to recipe) of citric acid in 1/4 cup (59mL) non-chlorinated water. Add to milk when specified in recipe.

  Notes About Adding Citric Acid To Milk:
  - Citric acid should be added to milk very slowly while stirring briskly to ensure even-distribution.
  - Do not pre-mix citric acid first in a small amount of milk. Add directly to the milk as described above.

  Storage:
  Store in a cool, dry place. Will last indefinitely when stored properly.

  Note:
  This Citric Acid contains no Glutamate, Glutamic acid or hydrolyzed protein.

  Kosher Note (From Supplier):
  We purchase this product Certified Kosher OU in bulk. The product is then repackaged into smaller quantities without Kosher supervision, thus voiding the Kosher certification. We are not, nor do we make any representation to be, under kosher certification.

View full product details »

Briess Munich Malt Extract, 3.3lb

$ 9.87

• Description
• Details

• An American malt extract made from Munich malt and pale malt resulting in a full-flavored, malty wort with biscuit flavors.

• Form:	Liquid
  Solids:	79%
  Fermentability:	75%
  Specific Gravity (in 1 US gallon of water):	1.035
  Color:	8º Lovibond
  Ingredients:	Pale barley malt extract, Munich barley malt extract, water
  Use:	Up to 100%
  Net Weight:	3.3lb (1.5kg)
  Origin:	United States

View full product details »

BLC - Beer Line Cleaner

Sold Out $ 4.55

• Description
• Directions
• More Info

• Keep your beer equipment clean and looking great! Beer Line Cleaner removes stubborn beer deposits (beer stone), yeast and protein from all kinds of beer and brewing equipment including beer lines, faucets, draft equipment, plastic, glass and more!

  Features:
  - Use in cold or warm water
  - Concentrated formula
  - Quick dissolving
  - Biodegradable
  - For use with hand, electric & pressure type cleaning units

  Shipping Restriction:
  This item can not be shipped outside the United States.

• 1. Drain beer from lines
  2. Mix 0.5 oz BLC per quart of water
  3. Pump solution into line
  4. Allow solution to sit or recirculate
  5. Completely rinse line with clear water
  6. Re-tap beer, open tap until beer flows
  7. Discard 1st glass and test beer

  Home Brewing Recommendations:
  Allow bottles, parts, fittings, carboys, etc. to soak in 1oz BLC per gallon of water. Additional product or scrubbing may be required.

• - At only a few cents per application, B-L-C Beer Line Cleaner is a value-focused way to remove beer stone, biomass, organics and mineral deposits from beverage lines.

  - B-L-C is a liquid product that does not cake or harden and it mixes instantly. This nitrate free formulation is also low in phosphates and 100% biodegradable. B-L-C works with all electrical, mechanical and hand driven cleaning units.

  - The primary active ingredient in B-L-C is potassium hydroxide, an alkaline compound with easy rinsing qualities that is less corrosive to metal parts and fittings. We blend potassium hydroxide with a proprietary blend of surfactants and chelating agents to help the caustic loosen and suspend soil. B-L-C also works with your budget! At 2 ounces of B-L-C per gallon of water, a 33 oz. container makes 16.5 gallons of powerful, quality cleaner.

  - B-L-C is a highly-effective cleaner and one of our milder brands of liquid beverage line cleaner. B-L-C is ideal for direct draw systems, tap boxes, or any system that uses shorter runs.

  - Attention Craft Brewers! Though it was formulated for cleaning lines, B-L-C is fantastic for small craft and home brewing operations. B-L-C quickly enters solution, removing and suspending soil in all water temperatures without extended contact times or excessive rinsing. B-L-C is also easier on hands than most brewing-specific products.

  International Shipping Restrictions:
  This item can not be shipped outside the United States or to United States military addresses outside the U.S.

View full product details »

Funnel Straining Screen

$ 3.19

• Description
• Details

• Replacement filter screen for 8in, 10in and 12in funnels in addition to the 10in anti-splash funnels made by the Vintage Shop. These No. 35 mesh strainers are ideal for straining pulp and small particles and snap securely in place.

• Screen Size:	4in	5.5in
  Outer Diameter:	4.0in (10.2cm)	5.5in (14cm)
  Overall Thickness:	0.13in (3.2mm)	0.20in (5.0mm)
  Mesh Size:	No. 35 - 0.04in (1mm)
  Material:	Nylon

View full product details »

29mm Gold Bottle Caps - 100-Count

Sold Out $ 4.17

• Description
• Details

• 29mm Gold caps for Champagne and European bottles that require an oversized 29mm bottle cap. A bottle capper with a 29mm bell housing is required to apply these caps (available separately).

• Color:	Gold
  Quantity:	100 Caps
  Top Diameter:	1-3/16in (30mm)
  Bottom Diameter:	1-3/8in (34mm)
  Material:	Metal

View full product details »

1/4in ID Stainless Steel Barbed Tail Piece

Sold Out $ 2.56

• Description
• Details

• 1/4in ID Stainless steel tail piece for gas or product lines in beverage draft systems.

• Width:	3/4in (19mm)
  Height:	7/8in (22mm)
  Inside Barb Diameter:	1/4in (6.4mm)
  Outside Barb Diameter:	5/16in (7.9mm)
  Required Tubing ID:	5/16in (7.9mm)

View full product details »

1/2in Racking Cane Tip

Sold Out $ 1.32

• Description
• Details

• An anti-sediment tip for a racking cane helps reduce the amount of sediment during siphoning by re-directing the flow and drawing in liquid from above the tip rather than below where the sediment layer is. This replacement tip will fit all standard 1/2in outside diameter racking canes.

• Height:	0.81in (20.6mm)
  Width (at widest point):	1.0in (25.4mm)
  Material:	Plastic
  Compatibility:	1/2in OD Racking Canes

View full product details »

1/2in MPT x 1/2in Barbed Stainless Steel Hose Stem

Sold Out $ 6.83

• Description
• Details

• 1/2in MPT hose stem with 1/2in barb. Fits 1/2in NPT hardware such as bulkheads and ball valves.

• Length:	1.5in (3.81cm)
  Overall Width:	0.81in (2.1cm)
  Thread:	1/2in MPT (Male Pipe Thread); 0.84in (21.3mm); 14 Threads Per Inch
  Barb Inside Diameter:	0.41in (10.3mm)
  Barb Outside Diameter:	0.5in (12.7mm)
  Material:	Stainless Steel

View full product details »

Buon Vino Super Jet Compatible #3 (Sterile) Filter Pads (0.5 Micron)

Sold Out $ 4.79

• Description
• Details
• Directions

• #3 Sterile filter pads for Buon Vino Super Jet filter. The #3 pad removes very small particulate from wine down to 0.5 microns. It should be used after using the #2 fine filter pad.

• Filter Pad Type:	#3 Sterile
  Micron Size:	0.5
  Overall Width:	7-7/8in (200mm)
  Overall Height:	7-7/8in (200mm)
  Thickness:	3/16in (4.8mm)

• 1. Filter wine after any fining agents have been used and have fully settled out of the wine.

  2. For best results, wine should be filtered after 2 - 3 months of age and after being stored in a cold location. After this time, wine can be filtered starting with the #2 fine filter pad followed by the #3 sterile filter pad after. Wait 2 - 4 days between filtrations.

  3. When filtering young wine less than 30 days old, begin filtering with the #1 coarse filter pad, followed by the #2 fine filter pad and then the #3 sterile filter pad (if desired). Wait 2 - 4 days between filtrations.

  4. Allow wine to rest for 2 - 4 days after filtration before bottling.

View full product details »

Buon Vino Super Jet Compatible #1 (Coarse) Filter Pads (5 Micron)

$ 4.29

• Description
• Details
• Directions

• #1 Coarse filter pads for Buon Vino Super Jet filter. The #1 pad removes large particulate from wine down to 5 microns in size.

• Filter Pad Type:	#1 Coarse
  Micron Size:	5
  Overall Width:	7-7/8in (200mm)
  Overall Height:	7-7/8in (200mm)
  Thickness:	3/16in (4.8mm)

• 1. Filter wine after any fining agents have been used and have fully settled out of the wine.

  2. For best results, wine should be filtered after 2 - 3 months of age and after being stored in a cold location. After this time, wine can be filtered starting with the #2 fine filter pad followed by the #3 sterile filter pad after. Wait 2 - 4 days between filtrations.

  3. When filtering young wine less than 30 days old, begin filtering with the #1 coarse filter pad, followed by the #2 fine filter pad and then the #3 sterile filter pad (if desired). Wait 2 - 4 days between filtrations.

  4. Allow wine to rest for 2 - 4 days after filtration before bottling.

View full product details »

Carbon Dioxide (CO2) and Nitrogen (N2) Gas Refill (30/70 Blend)

Sold Out $ 23.74

Food-grade blend of carbon dioxide (CO2) and nitrogen (N2) gases...

View full product details »

7.9 Gallon Plastic Fermenting Bucket

$ 20.04

• Description
• Details

• 7.9 Galloon food-grade bucket for fermenting beer, wine, cider or any fermented beverage. It is durable, light-weight and ideal for fermentation periods of 2 weeks or less. Available with or without a pre-drilled lid and grommet. Airlocks available separately. BPA-free.

  Features Printed On Bucket:
  - Gallon volume markings
  - Metal carrying handle
  - Gravity conversion chart with Plato, specific gravity and brix measurements
  - Specific gravity/temperature correction chart
  - Brix/temperature conversion chart
  - Fahrenheit/Celsius conversion chart 
  

• Volume:	7.9 US Gallons (29.9L)
  Width (Top):	13.75in (34.9cm)
  Width (Bottom):	11.9in (30.2cm)
  Height:	15.25in (38.7cm)
  Material:	High density polyethylene plastic (HDPE)
  Origin:	Canada

View full product details »

#14 Tapered Cork

Sold Out $ 0.56

Fits 1 gallon glass jugs with 30mm inside opening diameter.

View full product details »

#16 Tapered Cork

Sold Out $ 0.85

Fits Italian glass carboys.

View full product details »

26.5mm Bell Housing

Sold Out $ 3.51

• Description
• Details
• Compatibility

• 26.5mm Bell housing for standard beer bottles that require a 26.5mm bottle cap. This housing fits the 'Emily' capper, 'Red Baron' capper, Agata bench capper and Super Agata bench capper (Fits only new style Agata cappers that take female bell housings).

• Thread Size:	5/8in x 18 (M16 x 1.5)
  Material:	Metal

• - Fits bottle cappers with replaceable bell housing
  - Compatible with 26.5mm bottle caps and 26.5mm capable bottles only

View full product details »

Maltodextrin, 8oz

$ 2.65

• Description
• Details
• Directions

• Maltodextrin is a non-fermentable carbohydrate that provides beers with a fuller body without affecting the color or flavor. It can be added directly to the boil in the brewing process and can be used in many beer styles.

• Form:	Powdered
  Ingredients:	Maltodextrin Powder
  Net Weight:	8oz (227g)

• Usage varies. Typical usage is 0.8 - 1.6oz per 1 US gallon.

View full product details »

Brewer's Best Wheat Malt Extract, 3.3lb

$ 10.89

• Description
• Details

• Brewer's Best Wheat Malt Extract is created from a blend of wheat malt and 2-row barley to achieve a clean, crisp flavor and light color. It is suitable for all wheat beer styles or any beer style where a hint of wheat flavor and mouthfeel is desired.
  

• Form:	Liquid
  Solids:	80.2-82.3%
  Fermentability:	Not Available
  Specific Gravity	1.4250 - 1.4397 PPG
  Color:	2 - 4 Lovibond
  Ingredients:	barley, wheat, water
  Use:	Up to 100%
  Net Weight:	3.3lb (1.5kg)

View full product details »

FermFast Dual Smooth, 30g

Sold Out $ 2.94

• Description
• Details

• Instantly improve the flavor and body of young wines with FermFast Dual Smooth. This convenient 2-part additive can instantly capture the character of wine aged in oak casks by imparting oak flavor and aroma to finished wine. It also has the ability to soften harsh flavors and improve body.  It is a two-part additive containing glycerine and liquid oak extract (Sinatin 17).

• Form:	Liquid
  Contents:	Sinatin 17 (Liquid Oak Extract), Glycerine
  Volume:	1.06oz (30g)

• Stir the contents of each packet into 6 US gallons (22.7L) of finished wine prior to bottling.

View full product details »

32oz Amber Mini Growler Glass Jug

$ 5.29

• Description
• Details

• 32oz Amber mini growler glass jug with screw-top finish. Use for beer, soft drinks, water or any beverage. Requires 38mm/400 screw cap (available separately).

• Inside Opening:	1-1/8in (19mm)
  Height:	8-3/4in (22.2cm)
  Overall Width:	3-7/8in (9.84cm)
  Material:	Glass
  Color:	Amber
  Volume:	32oz US fl oz (946mL)

View full product details »

Comet Hop Pellets

Sold Out $ 2.37

• Description
• Details

• Comet hops are an American variety with a dominant grapefruit character. It has been traditionally used as a bittering hop, however, it has been growing in use as a finishing hop in bolder IPA styles.

• Origin:	United States
  Alpha Acid:	9.4 - 12.4%
  Beta Acid:	3.0 - 6.0%
  Co-Humulone (% of Alpha):	40 - 45%
  Total Oil mL/100g:	1.0 – 1.5
  Use:	Bittering and Finishing
  Form:	Pellets

  * Numerical data represents average values

View full product details »

Muntons Mexican Cerveza Kit, 3.3lb

Sold Out $ 14.72

• Description
• Contents
• Details
• More Info

• Muntons Mexican Cerveza kit produces a gentle, delicate light lager with a mild flavor and golden color. This kit requires 2.2lb of sugar or dried malt extract which is available separately. Produces 6 US gallons (23L). Includes yeast.
• - 3.3lb Hopped Liquid Malt Extract
  - Yeast

• Beer Style:	Mexican Cerveza
  Form:	Liquid
  Color:	<5º Lovibond (<13 EBC)
  Solids:	80 - 82%
  Original Gravity:	1.036 - 1.040
  Bitterness:	37 - 47 EBU
  Ingredients:	Barley malt extract, hop extract, water, yeast
  Hopped/Unhopped:	Hopped
  Origin:	United Kingdom
  Volume Produced	6 US gallons (23L)
  Net Weight:	3.3lb (1.5kg)

• This kit requires an additional 2.2lb sugar or malt extract to complete the recipe.

  In addition to this item, you will need a few other things to start your homebrewing journey. These include a stainless steel pot that is at least 8 quarts in size, a homebrewing equipment kit, beer bottles, bottle caps and a funnel. You must also have a dark, clean location to create the best possible beers. It should be relatively steady in temperature and be between 60° and 75°F for making ales and between 45° and 55° for making lagers.

View full product details »